Flojet RV Macerator Pump 18550000A
$280.16
Skip to product information
Flojet RV Macerator Pump 18550000A
$280.16
Usually ships in 1 to 3 business days.
Delivery is usually 2 to 5 business days after it ships.
Delivery is usually 2 to 5 business days after it ships.
- Free shipping to the lower 48
- 30-day returns on unused parts
- New Flojet part in the original packaging
Not sure it fits? Email hello@apertureauto.com with your year, make, model and VIN. We will check the manufacturer's vehicle list before it ships.
Questions? Email hello@apertureauto.com. We reply within one business day.
Overview
Flojet RV Macerator Pump, manufacturer part number 18550000A.
RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump, you can not only empty the black and grey water tanks at the conventional Dump Station but also down a toilet, into your house sewer clean-out, septic tank, or into a mobile waste wagon.
The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high-quality Jabsco design is found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump uphill, and around corners. The RV waste pump will simplify and improve your RV experience!
Features:
- A neat and clean way to quickly evacuate waste tanks
- Empty black-water and greywater Holding Tanks at home
- Grinds waste as it pumps
- Built-in Impeller Protection Device...longer life!
- The flow of up to 13 GPM for fast, clean Holding Tank evacuation
Easy to Install
Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.
Applications
- Empty holding tanks and avoid dump stations
- Transfer waste from recirculating toilets to main holding tank
Impeller Release Feature
After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.
Specifications:
- Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
- Impeller: "Jabsco Nitrile" compound
- Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
- Seal: Lip Type
- Ports: Inlet RV model - 3" (76mm) hose
- Outlet - 1" (19mm) Hose Barb
Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry
Complies with USCG Regulation 183.410 & ISO 8846 MARINE for Ignition Protection
Weight: 3.5lb (1.6 kg) Approx.
Specifications
| Manufacturer part number | 18550000A |
|---|---|
| UPC | 705474250004 |
| Type | RV & Trailer |
| Country of origin | Mexico |
| Shipping weight | 5 lb |
Compatibility
Check the specifications above against your boat or vehicle. Not sure? Email hello@apertureauto.com with the make, model, year and engine, and we will confirm before the order ships.
California Proposition 65
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Questions and answers
Is this part new?
Yes. It is a new Flojet product. Manufacturer part number 18550000A, UPC 705474250004.
What does shipping cost?
Shipping is free to the contiguous United States. It ships from an East Coast warehouse and tracking is emailed as soon as it ships.
Can I return it?
Yes. Unused, uninstalled items in the original packaging can be returned within 30 days of delivery. See the refund policy for details.